人物10077 项目5003 室内506 家居及产品158 文章2336 方案1325 摄影717 视频224 图书201 专栏99 读者来稿 最新评论21,570 所有作品10937 所有图片146,672
1469455597116320.jpg
行走的艺术鞋店

封面照片
行走的艺术鞋店
image © Praxis d'Architecture
所有图片及文字来源:第一实践建筑设计工作室

 

行走的艺术鞋店
地点: 北京
时间: 2014
项目状态: 已建成
规模: 13平米
项目设计师: 狄韶华
团队: 冯建成、国一鸣、刘星、冯淑娴

鞋店的主人创业之初,租下了这样一个13平米的小空间。租下后才知道过不了多久现存的空间就要被拆掉,然后房东会给补偿一个大一些的空间。无奈之下,她决定尽快开始使用这个空间。这种情况决定了我们为这个空间的设计必须是经济的和易于快速建造的。以此为出发点,我们将鞋架设想成一个在13平米的空间里自成一体,可拆卸移动的家具,可以说是一个装置,不依赖于现有空间的墙面顶面而存在。当被移至另一个更大的空间时,鞋架便成为一件独立的家具,不造成不必要的浪费。

由于鞋架的可移动性,制作材料也要求相对轻质,并且满足易切割的要求。综合比较,我们最后选择了密度板为主材料。鞋架由竖向的55块板构成,每块板按照设计图纸切割出曲线和凹槽,依背板固定,形成连续的曲面和一条三面贯通的凹入的陈列带。陈列带底部由一块块水平板连接,成为鞋台。每一块鞋台的顶部都有一个灯盒。陈列带能提供至少六十多双鞋的摆放。

鞋店的的灯光设计没有采用常用的筒灯、射灯。灯光分了两部分,基础照明采用的是与石膏板吊顶相平的透光亚克力光盘,鞋的局部照明来自每个灯盒内一个5瓦的节能灯。鞋的储存和试鞋功能结合为一个放在中央的活动家具,兼做箱子和凳子。其形状与顶灯相呼应,与鞋架之间形成流动的顾客通道。

选择的密度板厚度为45px,外加烤漆后完成厚度为50px。在设计鞋架的节点时,我们以50px为模数,鞋台上方灯盒固定时比垂直板边向上向内退50px,下方的底板也比垂直板边向内退50px,从而使水平板与垂直板交接处的细部简洁一律。

鞋架的三维形式源于女性美丽的曲线。高跟鞋代表女人的性感和优雅,用设计表达一个属于女人的空间,就是要表达女人。女人最根本的美丽源自她的母性,她孕育生命的能力。连续的曲面和展示鞋子的凹槽试图表现女人体内能够孕育生命的空间,给人带来安全和舒适感。

鞋架
长度:8.1米
高度:2.8米
凹槽深度:625px – 975px
凹槽高度:725px – 1625px
材料:白色烤漆密度板, 节能灯管,透明磨砂亚克力板

IMPORTANCE OF WALKING STORE
Site: Beijing
Time: 2014
Status: Completed
Size: 13 sqm
Project Architect: Di Shaohua
Team: Feng Jiancheng, Guo Yiming, Liu Xing, Feng Shuxian

The owner of the shoe store was at the beginning of establishing her business, and rented this 13 square meter space. It was after the lease was signed that she was informed that the space would be demolished soon and she will be compensated for another bigger space. Without much choices, she decided to start to use the space as soon as possible. Such situation required our design for this space to be very economical and fast to built. Under such condition, we imagine the shoe shelves to be self supporting, movable and ready for re-assembling. It is an installation rather than a interior fixture attached to the wall ceiling. It allows to be moved to a bigger space, and becomes an Independent furniture. In this way the waste could be kept minimum.

To make the shoe shelves movable, the major material needs to be light weight and easy to cut. We finally chose MDF board. There are 55 vertical panels, each cut out with a curved edge and a notch, placed against back boards to form a continuous curved surface with a notch space for shoe display. Each shoe stand has a light box above. The notch provides a space allowing display of a minimum 60 pairs of shoes.

The lighting design of the shop did not apply the commonly seen spot lights. Instead, ambient light comes from behind a translucent acrylic panel flushed with ceiling, and intensified light for shoes comes from a 5-watt energy efficient light bulb enclosed in a light box on top of each shoe stand. Shoe storage and sitting are combined to become a movable furniture in the middle of the space with a shape that echos that of the ceiling light, providing a passage between the sitting and the shelves.

The MFD board is 45px in thickness, which becomes 50px after paint is applied. When designing details, we applied the 50px as a module. The light boxes and shoe stands all recessed inward or upward for 50px against the vertical panels, giving a clean and consistent look to the details where vertical and horizontal panels meet.

The 3D surface of the shoe shelves came from curves of woman’s body. Heels represent women sexiness. To express a space belonging to women is to express the nature of women. The true beauty of a woman comes from her inherent ability to bring life into the world. The continuous curvy surface and the notch of shoe shelves represent womb of a woman that conceives lives and provides safety and comfort.

The shoe shelf
Length: 8.1m
Height: 2.8m
Depth of notch: 625px – 975px
Height of notch: 725px – 1625px
Material: MDF board, energy efficient light bulbs, translucent acrylic panels

相关POST
狄韶华——第一实践建筑设计工作室创始人
2009年创建第一实践建筑设计工作室。天津大学建筑设计...
林绿 文七七sos 竹竹玉 等3人赞过
2016.09.28
请帖个标签,写个点评吧!
标签(多个标签用逗号隔开) 登录可保存标签
绑定新浪微博可评论

小贴士


标签收藏可以有利于您以后的内容分类管理
->进入收藏管理页